the cost for an automatic battery cage system for 20000 layers

Egg cages are directly welded by cold wire drawing and have no corrosion resistance. Generally, the factory cage nets can be installed after hot dip zinc treatment for the cost for an automatic battery cage system for20000 layers . The galvanizing technology was developed by the International Lead and Zinc Association in the 1980s through trial and error. The alloy plating composition produced by the galvanizing technology is located at the common point of zinc-aluminum, and the grain is relatively small and compact: the aluminum content is only 5%, so the immersion plating temperature is low, the diffusion degree of iron is relatively small, and it is difficult to form slag. The process has a fast cooling rate and forms a non-product with excellent corrosion resistance on the surface of the coating, so that it has excellent corrosion resistance. However, this technology has not been widely used in the field of chicken cage processing in China.

Unlike the hot dip zinc process for the cost for an automatic battery cage system for 20000 layers , the cage mesh processed based on Galfan galvanizing technology uses a process of first galvanizing and then welding. At the solder joints, high temperature can produce Fe/A1(Zn) metal compounds with very strong corrosion resistance.

In the long-term use of the cage mesh made by the hot dip galvanizing process for the cost for an automatic battery cage system for 20000 layers , the zinc layer is continuously decomposed. Once the corrosion reaches the zinc alloy, red rust will appear, which will make the surface of the cage mesh rough and pits appear. Galfan galvanizing The surface of the cage wire will have a gray protective layer of zinc-aluminum oxide. As time goes on, the aluminum-rich protective layer on the Galfan coating becomes thicker, so the cage mesh processed by Galfan galvanizing technology is more resistant to corrosion.