Where in Ghana do they manufacture layer cages

The key parts of the key part of the chicken coop include the egg gap and the angle of the egg, the structure of the cage net and the side net for Where in Ghana do they manufacture layer cages.

The egg laying angle of the laying hen cage (that is, the angle between the bottom plane of the chicken cage and the horizontal plane) is generally between 7 and 11 degrees for Where in Ghana do they manufacture layer cages. When the angle of the egg is too large, the chicken is consumed in the cage, it is easy to fatigue, and the egg is rolled out quickly. The egg breaking rate is increased, and if the angle is too small, the egg nesting phenomenon is likely to occur, and the egg breaking rate is also increased. At present, the laying hens have a large body weight, and the sinking of the cage is more serious. The angle of the bottom net is not too small, and it is generally suitable for 9-10 degrees. The gap between the chicken cage and the bottom of the net is the straight line distance from the bottom of the front net to the plane of the bottom net. It is most suitable for 6 cm. It is easy to get stuck in the egg when it is too small. When the chicken is too large, it is easy to escape due to its small size.

The vertical steel spacing of the cage net is generally the same as that of the front roof net, and the vertical wire spacing of the side nets can be larger or smaller for Where in Ghana do they manufacture layer cages . There are several transverse wires in the two mesh sheets. The distance between the two adjacent bars must be greater than 5 cm or less than 3 cm. The distance between 3.5 and 4.5 cm is most likely to catch the chicken's head or neck. The Ministry caused casualties. It is advisable to use a distance of about 3 cm between the transverse steels of the lower half of the side nets. This prevents the chickens in the two adjacent single cages from rubbing each other. The lower part of the back net should also have two or three narrow ones. Up and down gap, if there is only one narrow gap or not, it is easy for the chicken to fall out of the cage when laying eggs.