backyard small scale layers hen using caged battery in nigeria

Egg cage bottom net grid and model for backyard small scale layers hen using caged battery in nigeria : There is a certain relationship between the joints of the chicken feet and the bottom mesh. There are two options for the design of the bottom mesh. One is to use a standardized grid, and the other is to design it according to the specific situation. Each has its own advantages and disadvantages. From the perspective of the development of mechanized chickens in various countries, more and more attention is paid to the performance of chickens. It is necessary to specially develop nets suitable for raising chickens. However, the standard grid is low in price, and this advantage cannot be lost in design. Can you unify the performance of chickens and manufacturing costs? The answer is yes. That is to develop a grid modulus suitable for raising chickens. The cage is made up of six mesh faces, each with its particularity. This is to find a common factor. This is not an easy task. In terms of the bottom net, the mesh distance should be roughly 25 mm, and the 24-to-26 common factor is more, which seems to be easier to arrange. However, satisfactory results have not yet been obtained and are for further study.

Egg trough for backyard small scale layers hen using caged battery in nigeria : The egg trough is mostly integrated with the bottom net. The egg trough is greatly affected by the deformation of the bottom net, and the linearity is difficult to guarantee, which affects the normal operation of the egg line. The frequent movement of the chicken in the cage will also cause the egg on the egg trough to move, increasing the egg breaking rate.

The egg trough is separated from the bottom net and has good linearity. However, improper assembly, the joints are likely to form an acute angle, resulting in damage to the eggs, and even more serious cases: the bottom net drooping (hanging chicken cage), eggs stay at the junction.

In order to prevent the eggs in the egg trough from being foraged for backyard small scale layers hen using caged battery in nigeria, the egg trough should be at a distance from the front net plane. It should be observed that this distance should be greater than 7 cm. If you set the eggshell, you can narrow it down. The shape of the egg trough is flat and concave. The egg moves on the concave bottom surface, and the stability is better. If the whole mesh is added on the egg trough, the rigidity of the egg trough can be increased, the deformation can be reduced, and the egg line transportation is favorable.