The feeding machine as an automated chicken-raising equipment has entered most markets. In general, farmers will choose the feeding machine because the automatic feeding machine can realize automatic feeding and greatly reduce the artificial strength. How to maintain the automatic feeder in the process of use, in order to better use, increase its life?
First of all, to ensure the cleanliness of the feeder, the environment inside the house is corrosive, and the equipment should be cleaned regularly to ensure its normal use. Every two months in daily life, a soft slide is added to the bearings, sprocket and other moving parts, which can protect the bearings and increase their service life. Circuit repairs are often carried out to avoid leakage and phase loss phenomena. If the phase is missing, the motor will be damaged and the rails must be kept free from obstructions. If there is any obstruction, the feeder will be derailed. Adjust the appropriate height of the photoelectric switch to avoid the auger blocking the material, causing damage to the auger. When opening the feeder, pay attention to safety during operation.
Everyday, if there is a loose screw, it should be reinforced immediately. With the innovation of technology, feeders are becoming more and more popular. However, when they are used for a long time, they will encounter various problems. However, how can we maintain them? When the loading machine is started, it is better not to put anything on it. In that case, it will easily lead to excessive pressure on the motor and burn out the motor.
Check that the belt is intact and loose. Feeders rely on belts to transport materials. Only normal belts can give full play to the machine's production performance. The amount of work can be maximized. Because the various components of the loader are connected by gears and chains, the gears and chains must be guaranteed to be maximally lubricated so that they do not damage the machine due to lack of lubrication. As the feed produces large dust, it will cause a large amount of dust to accumulate in the control box of the automatic feeder. Dust will cause a short circuit in the internal circuit and damage the electrical circuit and other components. Therefore, it is necessary to clean it at intervals. Control the dust in the control box.
The main power of the feeder is the motor. The motor has the power motor and the speed reduction motor. (Because the speed of the motor is very high, the deceleration motor is used to reduce the speed when transmitting power.) When using it, check the power motor and gear motor for abnormalities. The motor should be maintained at a proper time, such as adding gear oil to gears of the reducer.