Broiler battery cage automatic system for 21000birds

With the development of the chicken industry, the degree of automation of broiler cages has increased. What kind of equipment are needed for the chicken cage factory to produce high-quality broiler cages?

Firstly, a wire drawing machine is needed. In the production of broiler cages, there are wire wires with different wire diameters. The newly-advanced wire round wire generally does not satisfy the wire diameter of the chicken cage, so generally it has to be passed through the wire drawing machine to different specifications. Silk, in order to meet the requirements in production, can produce different kinds of chicken cages, make the cages into different structures, and keep them more rationally. Therefore, the first process for the production of chicken cages generally requires the use of a wire drawing machine. If there is a separate wire drawing plant in the surrounding area, it is also possible to buy different diameter wire. Generally satisfying such requirements, the development of this film is relatively high and there are different divisions of labor.

After the silk is finished, it is necessary to straighten the yarn. At this time, the straightener is needed. The straightening machine has two functions. One is to straighten the wire and the other to a different length before welding. There are different specifications for the length of the chicken cage, so according to the length of the cage, cut into different lengths of wire, in order to weld the cage net. When welding cages, spot welders can be used manually, and automatic welders and automated spot welders can be used. This machine can weld different lengths of wire into cage mesh. Now it is still mainly manual welding, many manufacturers mainly use artificial welding, automatic welding technology has not yet matured, but with more regular mesh when using automatic welding, such as the bottom of the cage is generally used Automatic welder. The efficiency of the automatic welder is much higher than that of the manual, but the complex mesh like the top of a chicken cage does not use automatic welding. However, automatic welding as a machine that can increase production efficiency in the future will certainly replace the traditional manual welding. After the spot welding machine welds the cage net into a mesh sheet, it needs to cut the head machine because the wire head will surely come out of the extra part when the welder is working. At this time, it is necessary to cut these extra pieces, and then it is necessary to use the cut. Head machine.

The equipment used is the bending machine. The bending machine has two purposes. One is to fold the egg tray out of shape, and the other is to bend the mesh into a mesh type. Today's coops generally consist of three pieces. The top and front nets are one piece. The ground and back nets are one piece, and the grid piece is one piece. This way, the top and the front pieces are folded one by one, and the bottom and back pieces are broken. After the folding, the broiler cage is set, and then the zinc is plated and it is ready for use. These are the processing techniques of the broiler cages and the equipment needed. Of course, these are the steps. However, if you want to get good quality chicken cages, you have to strictly require each step and do a good job for each link. For example, the quality of the spot welding time is more important, if the welding time is not good at the spot welding, after the chicken cage is tied together, the use of the chicken cage will soon affect the life of the cage, so it will affect the life of the cage. In each link, doing the best will increase the quality of the chicken cage by a step. If you do not pay attention to the requirements for production, even if the material used for the cage is good, the chicken cage will not be durable.

The above is a description of the conventional machines required for the production of broiler cages. When there are some auxiliary small machines, they are not introduced one by one. These small machines are very common, such as cutting machines, welding machines, etc., if used. These machines are needed in the market and can be bought at any time in the market.