battery cages for day old chicken poultry for 5000 birds

How to operate chickens using stacked brooding breeding equipment?

The installation of the drinking device for the chicken house, during the brooding period, the nipple drinker should be installed in a clear, easy-to-discover place of the chick, so that the chick can find drinking nipples and drink water in time. According to the habit of chickens drinking water upwards, drinking nipples should be installed above the body of the birds. The growth rate of chicks during the brooding period is fast, and an adjustable space should be reserved for the installation of drinking nipples. The height of drinking nipples can be adjusted at any time according to the growth of chickens to ensure that the chickens drink water normally and meet the drinking habits of chickens. To prevent the nipples from being too low, there is a phenomenon in which the chickens easily come into contact with the nipples and leak water. The nipples are too high. The chicks cannot reach the drinking nipple and drink no water, which affects the normal growth and health of the chicks. According to the number of chickens, determine the number of drinking nipples. The number of chickens per cage is larger in the chicken stage. Several drinking nipples should be installed in each cage as much as possible to facilitate the initial drinking training of the chicks, meet the water requirement of the chicks, prevent the birds from overcrowding, and crush the chickens. According to the number of chicken cages in the coop, a pressure-control water tank should be installed at the water inlet of each cockpit to ensure uniform water pressure in each section of the cockpit. The end of the water pipe should be installed with a plug that can open the water pipe flexibly, so that the water pipe can be opened at any time and the foreign matter in the water pipe can be discharged or degenerate.

When drinking nipples are installed, the drinking water pipe must be drilled in a round and smooth manner, so that the drinking nipple is in close contact with the drinking water pipe, so as to ensure no water leakage. Drinking nipples should be installed in the middle of cage cages. They should not be close to one side. Otherwise drinking water pipes may be deformed due to temperature changes (thermal expansion and contraction), which causes the cage wire to push the drinking nipples, resulting in drinking nipples and drinking pipes. Can't close contact and leak. With the acceleration of modern chicken-breeding technology, automatic chicken feeding systems (hen house drinking fountains) have become widespread. Many farmers choose nipple drinking fountains as the water supply system. Nipple drinking fountains have the advantages of meeting chickens’ drinking water, saving labor, saving water, improving drinking water hygiene, and improving the economic benefits of raising chickens. However, most chicken farms often encounter problems due to unreasonable installation methods during the use of nipple drinkers, affecting chicken production and normal drinking of chickens. When installing the nipple drinker, in addition to the general requirements, it is also necessary to consider the specific requirements according to the different production stages of the chicken to ensure the installation of the nipple drinker is reasonable.

The general requirements for the installation of drinking houses for poultry houses, the installation of nipple drinkers should be standardized and reasonable, ensure that the water pipes are straight, and ensure that the water supply of each section of the water pipe is even. A water filter should be installed at the inlet end of the water pipe to prevent foreign matter from entering the drinking water system and blocking the water fountain and polluting the water. Drinking nipples should be installed vertically downwards to avoid water leakage and to satisfy the drinking habits of the birds. According to the number of chicken cages in the coop, a pressure-control water tank should be installed at the water inlet of each cockpit to ensure uniform water pressure in each section of the cockpit. The end of the water pipe should be installed with a plug that can open the water pipe flexibly, so that the water pipe can be opened at any time and the foreign matter in the water pipe can be discharged or degenerate. When installing drinking nipples, the drinking water pipe must be drilled in a round and smooth manner, so that the drinking nipple is in close contact with the drinking water pipe, so as to ensure no water leakage. Drinking nipples should be installed in the middle of cage cages. They should not be close to one side. Otherwise drinking water pipes may be deformed due to temperature changes (heat expansion and contraction), which causes the cage wire to push the drinking nipples, resulting in drinking nipples and drinking pipes. Can't close contact and leak. 1, early drinking water is very important, egg cage manufacturers recommend that you can add vitamins in the water, or add glucose or white sugar, these are possible, and some feeding rehydration salts, common rehydration salts. Of course, if you are worried about an outbreak, add some antibiotics. 2, the water temperature of drinking water should not be too low, the water temperature can be kept close to room temperature, to allow all the chickens to drink water, a small amount of water each time, do not let the rest of the water stored in the drinking fountain too long. 3, in the early brooding, as far as possible before each drinking water or daily cleaning and disinfection of drinking fountains. 4, because of the presence of yolk, so chicks just hatched, do not need to eat, can be fed 24 hours after hatching, you can also eat 2 hours after the first drink. It is not good to eat too early and it is easy to damage the digestive organs and affect future growth and development. 5, the quality of starter food is very important, the main feed needs the freshness, particle size, whether it is conducive to digestion, etc., can use finely chopped corn kernels or millet, large-scale farming can use chicks feed. 6. When the chicks start eating, they can feed the kraft paper or food dish without using a chick cartridge. 7. How much is the appropriate amount of chicks fed? Egg cage manufacturers recommend that you generally use 50 chicks to give 250 grams, and each feed should be eaten within 20 to 30 minutes as a standard. Feed every 2 hours or so.

1. The staff should be light in the house, do not have special sound, try to avoid causing disturbances to the flock. 2. Light bulbs should be wiped once a week. Bad bulbs should be replaced in time to ensure proper illumination. 3. Keep your homes dry. Always check your drinking water system. Do not leak water or spill water. 4. Keep the house clean. At least once a day to clear the manure, the cold season to clear the manure at noon change in order to promptly discharge ammonia.