Layer-by-layer laying hens equipment is a popular method in the aquaculture industry in recent years, and is also the result of continuous development of science and technology. Using hens and cages has enabled many hens and broilers to achieve intensive, large-scale farming models, and also allows chicken farmers to obtain With rapid development, the farming methods have improved, and the farming techniques naturally have to be changed in order to be able to adapt to the new farming methods and to cooperate with each other so that the laying hens can achieve better production performance. The following Xiaobian will introduce the layer-by-layer chickens Equipment breeding techniques.
1, the use of layer cage chicken density should be appropriate: the breeding density refers to the number of square meters per chicken chicken cage area. On a certain coop floor, the larger the rearing density, the more the number of chickens raised, but if the density is too large, the air in the house is poor, the activities and diet of the chicken are inconvenient, and both the growth rate and the laying rate decrease. The result is more harm than good. Therefore, even at high density, the density should be appropriate and not too dense.
2, the use of layer cage chickens to place enough feed trough and sink: In a large group of high-density feeding conditions, the collar to keep each chicken have the appropriate feed trough and sink length, and the troughs and sinks It may be evenly placed in various parts of the house. In this way, although the density of chickens is high, each chicken can have a certain position and can drink water nearby to ensure that there is no shortage of feed water, and thus the production performance will not be affected.
3, the use of laying hens to raise chickens to enhance ventilation: hens cage multi-layer feeding is a high-density feeding mode, so in high-density feeding conditions, the number of chickens so a large amount of breathing, the relative humidity, the concentration of harmful gases It is easy to rise. In the season when the temperature is high, it is easy to increase the temperature of the house. In order to maintain a good air condition in the house, ventilation equipment must be installed or installed in order to increase the ventilation and continuously exchange enough fresh air.
4, the chicks do a good job in cutting off the work: large groups of high-density feeding, it is easy to cause mutualism. In order to prevent feathering, licking, reducing the death of chickens, and avoiding the nuisance problem of chickens, it is common to cut 1/3-1/2 of the chicken gizzard up and down at the age of 6-10 days.
5, control the light intensity of the chicken house: When the breeding density is large and the light is very strong, it is easy to cause the chicken to be restless and restless, even if the phenomenon of licking and anal fistula still occurs after the break, the closed chicken house, the growing chicken group illumination Should be 5-10 lux, laying hens group at 10 lux. In a common chicken house, if the light is strong, when the scrofula occurs, ensure that the house is as dark as possible while maintaining adequate ventilation.
The above five points are some of the key points in the technique of laying hens in the process of laying hens for laying chickens. The technical points of using stacked hens and hens for laying chickens have many aspects, regardless of the environment, feeding. It is still necessary to immunize and disinfect the animals, etc., so that the flocks can be reared better and the laying hens have better production performance. Therefore, Xiaobian recommends that the farmers should choose the layer cage before raising chickens. A comprehensive study of laying hens culture technology, so that it can be better cultured, thank you for your attention!